Home> Technology & Research

Row Edged V Belt Parts Analysls Poly V Belt Error Parts Analysls Timing Belt Error Parts Analysls

Timing Belt Error Parts Analysls
Time:2015-03-09 22:29:42    Click:    Author:admin

1.jpg

ERROR ATTITUDE :Snapped 
REASONS:
1.Foreign objects in the transmission system
2.Corroded by fluids, oil or other things
3. Hit by other auto parts
4.Pretension too high
5.Belt crimped before using


OLUTIONS:
1.Take out the foreign objects, check all the components for damaging, if the damaged is serious, pls change the belt with the damaged parts together
2.Eliminate the leaks if they are in this system, clean every parts, pls change the belt
3.To check whether every parts of this system are in their right position, correct their location then change the belt 4.Correct tensile strength then change the belt 5.Change the belt and confirm the belt is not crimped before or while fitting

   
1-.jpg
 

ERROR ATTITUDE: One edge abrade  
REASONS:
1.Pulleys not parallel or offset: belt running off or even out of the flange
2.One pulley flange is error
3.Play in component bearings SOLUTIONS:
1.Check the parallel rate of the pulleys and change the belt
2.Exchange the error idler or tension pulleys into the qualified one and change the belt

 

在线看黄AV免费观看无毒-在线播放国产不卡免费视频-亚洲爆乳成aV人在线蜜芽-在线看免费观看日本福利片